GE Moisture Target Series 6 User Manual

Chapter 1. Features and Capabilities
Moisture Target Series 6 Hygrometer User’s Manual 1
Chapter 1. Features and Capabilities
1.1 Introduction
The Moisture Target Series 6 (MTS6) is a microprocessor-based,
single-channel hygrometer that measures moisture content in gases. It is
intended for Original Equipment Manufacturer (
OEM) applications, and is
suitable for a wide range of process conditions that require real-time
moisture measurement.
The MTS6 accepts any calibration range provided with GE probes (see
Chapter 5, Specifications for more information). It comes equipped with
two standard alarm relays, one fault alarm relay, and a single analog output.
It also has onboard data logging capability using an micro SD card.
1.2 Electronics Unit
The MTS6 displays measurement data on a liquid crystal display (LCD). You
can program your unit and enter probe information using the keys on the
front panel (see Figure 1). The MTS6 accepts line voltages of a universal
power supply from 100 to 240 VAC, or 24 VDC, depending on what is
ordered.
Figure 1: Front Panel

GE Moisture Target Series 6 Specifications

General

Brand	GE
Model	Moisture Target Series 6
Category	Measuring Instruments
Language	English