GE Moisture Target Series 6

Chapter 1. Features and Capabilities
2 Moisture Target Series 6 Hygrometer User’s Manual
1.3 Probes
The moisture probe is the part of the system that comes in direct contact
with the process. The MTS6 uses any GE M Series (see Figure 2) or a
VeriDri probe (see Figure 3) to measure dew point temperature in °C or °F.
The sensor assembly is secured to the probe mount and is protected with a
sintered stainless steel shield (see Figure 2).
Note: Other types of shields are available upon request.
Figure 2: M Series Probe
Figure 3: VeriDri Probe