Chapter 3. Operation and Programming
Moisture Target Series 6 Hygrometer User’s Manual 35
3.1.3 Entering Numeric Values
Since the MTS6 has no numeric keypad, numeric values are entered using a
“combination lock” style of entry:
Use the left and right arrow keys to select the digit to change. The
digit selected will be indicated with a .
Use the up and down arrow keys to increment or decrement the
digit.
Note: If incrementing or decrementing a digit would cause the numeric
value to exceed its allowable range (maximum/minimum value), the
digit will not change.
Press Enter to save the new value and return, or Cancel to return,
leaving the original value intact.
Figure 44: Numeric Entry
To Next Page
Loading...
