GE Moisture Target Series 6 User Manual

Chapter 3. Operation and Programming
44 Moisture Target Series 6 Hygrometer User’s Manual
3.4.3 Selecting Alarm Units
To select alarm units, from the Alarm Menu
select Units and press Enter .
Use the arrow keys to select a unit. Press
Enter to save (or Cancel to keep the
previous value), and return to the Alarm
Menu.
Note: If the VeriDri probe is being used, FH
replaces MH.
Note: If the ppmv software version was purchased, PPMv, mg/m
3
, g/m
3
,
and kg/m
3
will be available.
3.4.4 Selecting an Alarm Type
To change the alarm type, from the Alarm
Menu select Type and press Enter . A
screen similar to the following appears:
Use the arrow keys to select an alarm type.
Press Enter to save (or Cancel to
keep the previous value), and return to the
Alarm Menu.

GE Moisture Target Series 6 Specifications

General

Brand	GE
Model	Moisture Target Series 6
Category	Measuring Instruments
Language	English