GE Moisture Target Series 6

Chapter 3. Operation and Programming
Moisture Target Series 6 Hygrometer User’s Manual 43
3.4 Setting Up Alarms
Note: The MTS6 is equipped with two programmable high/low alarm relays
and one fault alarm.
3.4.1 Selecting an Alarm Output
To set up alarm outputs, on the Main Menu
choose Alarm and press Enter . From the
Alarm Menu choose Select and press
Enter . A screen similar to the following
appears.
Use the arrow keys to select the output
(A or B) to be set up and press Enter .
The display returns to the Alarm Menu.
3.4.2 Selecting Alarm Status
To select the alarm status, from the Alarm
Menu select Status and press Enter . The
following screen appears:
Use the arrow keys to select OFF or ON and
press Enter . The display returns to the
Alarm Menu.