Chapter 3. Operation and Programming
72 Moisture Target Series 6 Hygrometer User’s Manual
3.6.9d Setting the Date
To change the date, select Date and press
Enter . The following screen appears.
Use left and right arrow keys to select the
digit to be changed. Use up and down arrow
keys to change the value. Press Enter to
save (or Cancel to keep the previous
value), and return to the previous menu.
3.6.9e Setting the Year
To reset the year, select Year and press
Enter . The following screen appears.
Use the left and right arrow keys to select
each digit to be changed. Use the up and
down arrow keys to change the value. When
finished, press Enter and return to the
previous menu, then press Cancel to
return to the Settings Menu.
Note: The Service menu is accessible only to service engineers and
requires the use of a Factory-Level passcode.