GE Multilin 745

A1 Status745
Transformer Management Relay
Actual Values
http://www.GEindustrial.com/multilin
6–4
GE Multilin
Output Relays PATH: ACTUAL VALUES ! A1 STATUS !" OUTPUT RELAYS
The states of Output Relays 1 through 8 and the Self-Test Relay are displayed here.
Virtual Outputs PATH: ACTUAL VALUES ! A1 STATUS !" VIRTUAL OUTPUTS
The states of Virtual Outputs 1 through 5 are displayed here.
Self-Test Errors PATH: ACTUAL VALUES ! A1 STATUS !" SELF-TEST ERRORS
The FLEXLOGIC EQN ERROR value displays the source of the error occurring in a
FlexLogic™ equation. The
BAD SETTINGS ERROR value displays the cause of a bad
setting made while assigning setpoint values.
! OUTPUT RELAYS [!] OUTPUT RELAY 1
STATE: De-energized
↓
MESSAGE
OUTPUT RELAY 8
STATE: De-energized
MESSAGE
SELF-TEST RELAY
STATE: Energized
! VIRTUAL OUTPUTS [!] VIRTUAL OUTPUT 1
STATE: Not Asserted
↓
MESSAGE
VIRTUAL OUTPUT 5
STATE: Not Asserted
! SELF-TEST [!]
ERRORS
FLEXLOGIC EQN ERROR:
None
MESSAGE
BAD SETTINGS ERROR:
None