GE Multilin 745

Using enerVista Viewpoint with the 745745
Transformer Management Relay
Interfaces
http://www.GEindustrial.com/multilin
4–32
GE Multilin
FIGURE 4–11: Device Setup Screen (Example)
9. Click the Read Order Code button to connect to the 745 device and upload the
order code. If an communications error occurs, ensure that communications
values entered in the previous step correspond to the relay setting values.
10. Click OK when complete.
11. From the enerVista main window, select the IED Dashboard item to open the
Plug and Play IED dashboard. An icon for the 745 will be shown.
FIGURE 4–12: ‘Plug and Play’ Dashboard
12. Click the Dashboard button below the 745 icon to view the device information.
We have now successfully accessed our 745 through enerVista Viewpoint.