GE Multilin g60

GE Multilin G60 Generator Protection System 6-17
6 ACTUAL VALUES 6.3 METERING
6
f) POWER METERING
PATH: ACTUAL VALUES  METERING  SOURCE SRC 1  POWER
The metered values for real, reactive, and apparent power, as well as power factor, are displayed in this menu. The "SRC
1" text will be replaced by whatever name was programmed by the user for the associated source (see
SETTINGS  SYS-
TEM SETUP
 SIGNAL SOURCES).
 POWER
 SRC 1
SRC 1 REAL POWER
3: 0.000 W
MESSAGE
SRC 1 REAL POWER
a: 0.000 W
MESSAGE
SRC 1 REAL POWER
b: 0.000 W
MESSAGE
SRC 1 REAL POWER
c: 0.000 W
MESSAGE
SRC 1 REACTIVE PWR
3: 0.000 var
MESSAGE
SRC 1 REACTIVE PWR
a: 0.000 var
MESSAGE
SRC 1 REACTIVE PWR
b: 0.000 var
MESSAGE
SRC 1 REACTIVE PWR
c: 0.000 var
MESSAGE
SRC 1 APPARENT PWR
3: 0.000 VA
MESSAGE
SRC 1 APPARENT PWR
a: 0.000 VA
MESSAGE
SRC 1 APPARENT PWR
b: 0.000 VA
MESSAGE
SRC 1 APPARENT PWR
c: 0.000 VA
MESSAGE
SRC 1 POWER FACTOR
3: 1.000
MESSAGE
SRC 1 POWER FACTOR
a: 1.000
MESSAGE
SRC 1 POWER FACTOR
b: 1.000
MESSAGE
SRC 1 POWER FACTOR
c: 1.000