Using Vscan Extend
5-50 Vscan Extend – User Manual
5721203-100
Rev. D
Using Bladder Volume
To use the bladder app, the following are prerequisites:
• Install the app using GE Marketplace.
• Phased array probe is active.
• Live image is frozen.
The Bladder Volume App runs an algorithm on the currently
displayed image frame, finding the widest points on the bladder
contour and placing the measurement calipers at these widest
points.
1. On the scanned transverse image, press to Freeze.
The Bladder Volume App icon displays at the bottom of the
screen.
Figure 5-49. Bladder App icon
2. Scroll to select a suitable frame.
To Next Page
Loading...
