GE Vscan Extend - Page 181

Using Vscan Extend Apps
Vscan Extend – User Manual 5-51
5721203-100 Rev. D
Using Bladder Volume (continued)
3. Press the Bladder icon to start the bladder measurement.
The measurement cursors appear to perform the
measurement.
The widest points (D1 and D2) in a transverse image are
perpendicular to each other.
Figure 5-50. Transverse
NOTE: The Transverse Measure screen is displayed by default.
1. D1 - Longitudinal maximum length
2. D2 - AP diameter