ActionStep
On the Temperature Detail screen, drag the toggle button to TE_161
or TE_162 to select the applicable temperature sensor (1).
4
Type an applicable temperature setpoint value into the TC_163 Temperature
SP text box (2).
5
Set the mixer in Auto mode: drag the toggle button to Auto.
6
Result: The control of mixer vessel temperature is enabled.
222 Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD
7 Operation
7.3 Operate Xcellerex XDUO mixer
7.3.5 Control the temperature
To Next Page
Loading...
