ActionStep
Set the hopper onto the powder addition port and attach the hopper to the
port with the TC-clamp.
8
Verify that the agitator motor is running. See Start and stop the agitator
motor, on page 192 or Start the agitator motor, on page 207 for instructions
how to start the agitator motor.
9
Add the solids to the bag contents through the hopper.10
When the addition is complete, remove the hopper.
Tip:
Push the vessel lid section outwards for easier access to the powder addition
port.
11
Install the protective cap on the powder addition port.12
Install the TC-clamp.13
Push the lid back into place around the base of the TC-clamp.14
Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD 239
7 Operation
7.5 Add solid contents
To Next Page
Loading...
Need help?
General
