GE Xcellerex XDM Series - Page 29

System label
The system label identifies the product and shows electrical data and regulatory compli-
ance. The label shown below is an example. Actual data printed on the system label is
specific for each individual system and may vary from system to system.
Xcellerex™ XDUO 500
Vessel Type:
Code Number:
System Number:
Manufacturing Year/Month:
Supply Voltage:
System FLA:
Frequency:
SCCR:
Largest Motor:
Protection Class:
Enclosure Type:
10 kA
0.3 Hp
IP 45
Electrical Documentation:
1
20
ICES 001/NMB 001
GE Healthcare Bio-Sciences AB
751 84 Uppsala
Made in Sweden
MSIP-REM-2GE-0XXXX
The system label information is explained below.
MeaningLabel text
Jacketed or non-jacketed.Vessel Type:
Part number of the system.Code number:
Serial number of the system.System number:
The year and month the system was built.Manufacturing
Year/Month:
Electrical power requirements (V).Supply Voltage:
Maximum current consumption (A).System FLA:
Electrical power requirements in frequency (Hz).Frequency:
Short circuit current rating (A).SCCR:
Horsepower rating of the motor (hp).Largest Motor:
Electrical cabinet ingress protection.Protection Class:
Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD 29
2 Safety instructions
2.2 Labels