Instructions for disposal
Follow the instructions below for disposal of mixer vessel and the I/O Cabinet:
ActionStep
Decontaminate the mixer vessel and the I/O Cabinet following appropriate
procedures dependent on what type of environment the unit was located
in. Contact the local processing facility or government official for specific
disposal requirements for the vessel and the I/O Cabinet.
1
Separate all electronic components (terminal strips, power supplies, trans-
mitters, pumps, probes / sensors, etc.) from the I/O Cabinet and the mixer
vessel.
2
Decontaminate the probes and sensors that have come into contact with
the process fluid. Dispose of the fluid by following the disposal of hazard
materials according to the facility the unit is located in.
3
Dispose of electronic components as specified by local guidelines depending
on material used in the construction of the components. Contact the local
processing facility or government official for specific disposal requirements.
4
48 Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD
2 Safety instructions
2.6 Recycling information
To Next Page
Loading...
Need help?
General
