GEA VARIVENT X R Series User Manual

Reversing the idle position
Prerequisites
●
The valve has been removed, see 9.5 Removing the valve .
●
sufcient actuator size for application, check the actuator size if necessary
1. Turn the actuator to reverse the idle position.
2. Remove the valve, see 9.6 Installing the valve .
Þ
The idle position is reversed.
INFO After modication, reset the proximity switches and feedback button!
26 / 104 - 3.1 Set-up and function
0000000881 - 001 - EN-GB

GEA VARIVENT X R Series Specifications

General

Brand	GEA
Model	VARIVENT X R Series
Category	Control Unit
Language	English