DN 25
1"
DN 40/50
1,5"/2"
DN 65/80
2,5"/3"
DN 100
4"
1 1 Seal ring Ø 22 22 28 28
EPDM 924-084 924-084 924-085 924-085
FKM 924-082 924-082 924-083 924-083
HNBR 924-311 924-311 924-313 924-313
5 6 O-ring Ø 42 x 3 60 x 3 85 x 4 113 x 4
EPDM 930-309 930-144 930-150 930-156
FKM 930-168 930-171 930-176 930-178
HNBR 930-632 930-633 930-634 930-863
6 1 O-ring Ø 8 x 1,6 8 x 1,6 8 x 1,6 8 x 1,6
NBR 930-004 930-004 930-004 930-004
**7 1 V-ring Ø 35-5 52-6 76-6 104-6
EPDM 932-046 932-021 932-024 932-028
FKM 932-030 932-033 932-035 932-039
HNBR 932-087 932-088 932-090 932-100
29 1 O-ring Ø 20 x 3 20 x 3 20 x 3 20 x 3
NBR 930-026 930-026 930-026 930-026
30 1 O-ring Ø 20 x 3 20 x 3 20 x 3 20 x 3
NBR 930-026 930-026 930-026 930-026
94 1 V-ring RA/I Ø DN25 DN50/40 DN80/65 DN100
EPDM 221-365.13 221-365.07 221-365.08 221-365.09
FKM 221-365.21 221-365.10 221-365.11 221-365.12
HNBR 221-365.24 221-365.18 221-365.20 221-365.19
Sealing set complete
EPDM 221-304.45 221-304.46 221-304.47 221-304.48
FKM 221-511.108 221-511.109 221-511.110 221-511.111
HNBR 221-519.101 221-519.102 221-519.103 221-519.104
Grease RIVOLTA F.L.G. 100g tube not included in the seal kit
**do not grease item 7
413-136
Storage information: Store according to DIN 7716 / relative humidity approx. 65%, temperature 15-25°C and protected from
light
When replacing seals, observe the instructions in the instruction manual!