Geeetech Rostock 301 User Manual

SHENZHEN GETECH TECHNOLOGY CO,.LTD
6
4. Set up Repetier Host
The next step should be to configure your printer so you can connect your computer with the host. Open
Repetier Host.
When you start Repetier Host for the first time, you need to set up parameters for Rostock 301. Click the
Printer Settings on the top right corner, you will be presented with the following window.

Geeetech Rostock 301 Specifications

General

Brand	Geeetech
Model	Rostock 301
Category	3D Printers
Language	English