Geeetech Rostock 301 - 9 Introduction of Mixer

SHENZHEN GETECH TECHNOLOGY CO,.LTD
52
9. Introduction of Mixer
Mixer is used to adjust the mixing proportion of two kinds of filaments in order to realize the printing effect
of different colors and blending colors.
The menu in Mixer is shown as below:
Prepare: used for returning to upper Prepare Menu
Filament 0: displaying current proportion of Filament 0. Press to enter, the value can be adjusted.
Filament 1: displaying current proportion of Filament 1. Press to enter, the value can be adjusted.
Filament 2: displaying current proportion of Filament 2. Press to enter, the value can be adjusted.
Note: extruder order should be equivalent to filament order.