SHENZHEN GETECH TECHNOLOGY CO,.LTD
The sum of the proportion of Filament 0, Filament 1 and Filament 2 is 100%. If you manually adjust either
of the two values, system will automatically work out the other value. The proportion will not change unless
you readjusting it or choosing template again.
You need to know the logic of the three values.
The increase (or decrease) of Filament 0 will decrease (or increase) filament 2, vice versa
The increase (or decrease) of Filament 1 will decrease (or increase) filament 2, not vice versa
The increase (or decrease) of Filament 0 will not decrease (or increase) filament 1 directly, vice versa
For example, the initial proportion of F0/F1/F2 is 100%/ 0%/ 0%. If you want to print with the following
proportion:
F 0/ F1/ F2=80%/ 7%/ 13%. Only two steps are required.
Step1: Decrease F0 to 60%, now the proportion will be F0/ F1/ F 2=80%/ 0%/ 20%.
To Next Page
Loading...
Need help?
General
