Geeetech Rostock 301 User Manual

SHENZHEN GETECH TECHNOLOGY CO,.LTD
35
You can set the printing speed here:
7.2 Filament Setting
Set the filament diameter and printing temperature in the tab of Filament settings. Here we use 1.75mm PLA.
Usually the temperature of the print head is 195-210℃, the hot bed is 60-70℃. Here we set them as 200℃
and 65℃. If you use ABS filament, the recommended temperature of the print head is 230-240℃ (for the

Geeetech Rostock 301 Specifications

General

Brand	Geeetech
Model	Rostock 301
Category	3D Printers
Language	English