Geeetech Rostock 301 User Manual

SHENZHEN GETECH TECHNOLOGY CO,.LTD
40
Note: the configuration uses 1.75mm PLA filament and 0.4mm nozzle diameter, and it slices with slic3r
engine which is built-in in Repetier host 1.6.0.
Open slic3r>File>Load Config：
Direct to the file Rostock 301 PLA config.ini and open it.

Geeetech Rostock 301 Specifications

General

Brand	Geeetech
Model	Rostock 301
Category	3D Printers
Language	English