Geeetech Rostock 301 User Manual

SHENZHEN GETECH TECHNOLOGY CO,.LTD
62
The templates which have been set can be found in Mixer->Templates.
You can change setting parameters at any time during the printing process. When the setting is done, you can
start printing. Select the corresponding template in Mixer-> Templates during the printing process.
Note: the“*” after the template means the current template you are choosing and using. System will follow
your last chosen operation by default.

Geeetech Rostock 301 Specifications

General

Brand	Geeetech
Model	Rostock 301
Category	3D Printers
Language	English