Geemarc AMPLIDECT295SOS-PRO User Manual (English)

Questions and Answers:

S
scollinsJul 27, 2025
Why does my Geemarc IP Phone have interference during calls?
- J
  Jennifer FullerJul 27, 2025
  If you experience interference during a phone call on your Geemarc IP Phone, it could be due to several factors. The handset may be out of range, so try moving closer to the base. If you have high-speed internet (DSL), install a DSL filter between the base and the wall jack. Also, try moving the phone or base to another outlet and keep it away from electronic devices like routers, radios, cell phones, and appliances. Ensure the telephone base is centrally located, away from obstructions. If the issue persists, disconnect the base and plug in a corded phone to rule out wiring or service problems. Contact your telephone service provider if calls are still unclear (charges might apply).
J
Joseph GoodmanAug 2, 2025
How to fix a Geemarc IP Phone that is not working?
- B
  brookecollinsAug 2, 2025
  If your Geemarc IP Phone isn't working, ensure the battery is correctly installed and charged. Return the handset to the base after use for optimal performance. Check that the power adapter is securely plugged into an outlet not controlled by a wall switch, and that the phone line cord is firmly connected to both the base and the wall jack. Try unplugging the base, waiting 15 seconds, and plugging it back in, allowing a minute for synchronization. Remove and re-insert the battery; if it still doesn't work, consider a new battery. As a final check, disconnect the base and plug in a working phone to rule out wiring or service issues; if the other phone also doesn't work, contact your telephone service provider.
T
Timothy MontesAug 8, 2025
What to do if Geemarc IP Phone battery doesn't charge?
- J
  James HodgeAug 8, 2025
  If the battery of your Geemarc IP Phone is not charging or accepting a charge, first ensure the handset is correctly placed in the telephone base. If it is, remove and reinstall the battery, then charge it for up to 16 hours. If the problem persists, you may need to purchase a new battery.
M
Michael GuzmanAug 14, 2025
What to do if Geemarc IP Phone shows low battery?
- C
  creeseAug 14, 2025
  When a low battery icon appears on your Geemarc IP Phone, place the handset in the telephone base for recharging. Alternatively, remove and reinstall the battery and use it until fully depleted, then recharge the handset in the telephone base. If the problem continues, replace the battery.
J
Jessica CooperAug 20, 2025
How to reset Geemarc IP Phone?
- S
  Sharon RobbinsAug 20, 2025
  To resolve issues with your Geemarc IP Phone, put the handset in the telephone base, disconnect the power to the telephone base, and disconnect the battery on the handset. Wait a few minutes before reconnecting power to the telephone base. Re-install the battery and place the handset in the telephone base and wait for the handset to synchronize with the telephone base.

Geemarc AMPLIDECT295SOS-PRO Specifications

General

Brand	Geemarc
Model	AMPLIDECT295SOS-PRO
Category	IP Phone
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

Disposal Warning

Instructions for proper disposal of electrical and electronic products and batteries.

SET UP THE TELEPHONE

Package Contents

Lists the items included in the product package for setup.

Location

Guidelines for placing the base unit for optimal coverage and reduced interference.

Connect the Corded Base Station

Step-by-step instructions for connecting the telephone base station to power and the phone line.

Install and Charge the Handset Battery

Procedure for installing the battery in the handset and charging it.

Install the Pendant

Instructions for plugging in the pendant charger into an electrical outlet.

GET TO KNOW YOUR PHONE

Overview of the Handset

Identifies and describes the numbered parts and soft keys of the cordless handset.

Overview of the Corded Base

Identifies and describes the numbered parts of the corded base station.

Overview of the Pendant

Identifies and describes the numbered parts of the SOS pendant.

Handset LCD Display Icons and Symbols

Explains the meaning of various icons displayed on the handset's LCD screen.

Handset Menu Structure

Illustrates the menu flow and options available on the handset.

Text and Digit Entry Table

Provides guidance on entering text and digits for names, numbers, and dates.

English Character Set

Details the alphanumeric mapping for characters on the handset keypad.

USE YOUR PENDANT

SOS Emergency Calls

Explains how to set up and make emergency calls using the pendant or handset.

SOS Settings in Handset

Details how to configure SOS numbers on the handset.

Make SOS Emergency Calls

Describes the process of initiating an SOS call from the pendant or handset.

Select the SOS Language

Instructions for choosing the language for SOS prompts and messages.

Record SOS Messages

How to record a custom SOS message for emergency calls.

Play SOS Messages

Steps to play back recorded SOS messages.

Direct Memory Keys

How to store and use direct memory numbers (M1-M4) for quick dialing.

USE YOUR PHONE

Make an External Call

Instructions for making calls to external numbers.

Preparatory Dialing

How to enter a number before dialing.

Direct Dialing

How to dial a number immediately after picking up the handset.

Call from the Phonebook

Steps to make a call using an entry from the phonebook.

Call from the Call List

How to call a number from the incoming call list.

Call from the Redial List

How to call a number from the redial list.

Call Timer

Information about automatic call duration timing.

Answer a Call

How to answer incoming calls on the handset.

Adjust Earpiece and Speakerphone Volume

How to change the volume for listening and speaking.

Booster

Explanation of the volume booster function for enhanced earpiece volume.

End a Call

Methods for ending a phone call.

Mute a Call

How to mute the microphone during a call.

Set the Handset Silent Mode

How to turn the ringer on or off.

Set the Handset Keypad Lock

How to lock and unlock the handset keypad.

Redial the Last Number

How to access and use the redial list.

Redial a Number from the Redial List

Steps to select and dial a number from the redial list.

Store a Redial Number into the Phonebook

How to save a redialed number into the phonebook.

Delete a Redial Number

Steps to remove a single number from the redial list.

Delete the Entire Redial List

How to clear all numbers from the redial list.

Find the Handset

Feature to locate a misplaced handset using the base station.

Make an Internal Call

How to make calls between handsets or to the base.

Intercom

How to have a conversation between two handsets.

Call All Handsets

How to ring all registered handsets simultaneously.

Transfer an External Call

How to move an external call to another handset.

Make a 3-way Conference Call

How to set up a conference call with multiple parties.

PHONEBOOK

Add a New Phonebook Entry

Steps to save contacts with names and numbers in the phonebook.

Search for a Phonebook Entry

How to find contacts within the phonebook.

View a Phonebook Entry

How to check saved contact details.

Edit a Phonebook Entry

How to modify existing contact information.

Delete a Phonebook Entry

How to remove a single contact from the phonebook.

Delete the Entire Private Phonebook

How to erase all stored contacts.

Check the Phonebook Usage

How to view available and used phonebook memory slots.

Set the Fast Dial Numbers

How to assign numbers to speed dial keys.

Add or Edit the Fast Dial Number

Steps to set up or change fast dial numbers.

CALLER DISPLAY (NETWORK DEPENDENT)

View the Incoming Call List

How to access and review the list of incoming calls.

Store a Call List Number into the Phonebook

Steps to save a number from the call list into the phonebook.

Delete an Entry in the Call List

How to remove a single entry from the call list.

Delete the Entire Call List

How to clear all entries from the call list.

PHONE SETTINGS

Clock Settings

How to set the date and time on the phone.

Set the Date

Steps to configure the date format and set the current date.

Set the Time Format

Steps to configure the time format (12/24 hour).

Set the Time

Steps to set the current time.

Set the Date

Steps to set the current date.

Alarm Settings (Handset only)

How to set and manage the alarm clock feature on the handset.

Turn on/off the Alarm

Steps to enable or disable the alarm function.

Set the Alarm Time (if the Alarm is set to be ON)

How to configure the alarm time and snooze function.

Handset Settings

Configuration options for the cordless handset.

Set the Ringer Melody for Internal Calls

How to choose a ringtone for internal calls.

Set the Ringer Melody for External Calls

How to choose a ringtone for external calls.

Set the Ringer Volume

How to adjust the volume for incoming call ringtones.

Set Alert Tones

How to configure tones for key presses, low battery, and out of range.

Select Base

How to choose which base station the handset connects to.

Set the Handset Language

How to change the display language of the handset.

Rename the Handset

How to assign a custom name to the handset.

Choose the Information to be Displayed in Idle

How to customize the idle screen display.

Set the Auto Answer

How to enable automatic answering of calls.

Base Settings using the Handset

Set the Ringer Melody

How to select a ringtone for the base station's external ringer.

Ring Volume

How to adjust the ringer volume for the base station.

De-register the handset

Steps to remove a handset from the base station registration.

Set the Dial Mode

How to select the phone's dialing mode (Tone or Pulse).

Set the Flash Time

How to configure the flash time for call waiting or other network features.

Change the System PIN Code

How to change the base station's system PIN for security.

Registration

Reset Your Phone

ANSWERING MACHINE

Switching Answering Machine On/Off

How to enable or disable the answering machine.

Play Messages on TAM

Steps to listen to recorded messages on the answering machine.

Delete all Messages on TAM

How to erase all stored messages from the answering machine.

Record Memos on TAM

How to record a personal memo message.

Set the Answer Mode

How to configure the answering machine to record messages or only announce.

Record your Outgoing Message (OGM)

How to record a personalized greeting message for callers.

Playback the Outgoing Message (OGM)

How to listen to the recorded outgoing message.

Delete a Personalized OGM (SET OGM to DEFAULT)

How to remove a custom OGM and revert to the default greeting.

Set the Answer Delay

How to set the number of rings before the answering machine answers.

Set the Recording Time of Incoming Message

How to set the maximum length for recorded messages.

Set the TAM Language

How to choose the language for the answering machine's voice prompts.

Turn On or Off the Base Screening

How to enable or disable call screening on the base.

Change the Compression Rate

How to adjust the audio compression for message recording.

Activate Remote Access

How to access and control the answering machine remotely.

Change the 4-Digit Remote Access PIN

Steps to change the PIN for remote access.

Activate or Deactivate the Remote access

How to enable or disable remote access functionality.

Remote Operations

Details on using remote commands to manage the answering machine.

TROUBLESHOOTING

Common Cure for Electronic Equipment

Basic steps to resolve non-responsive phone issues and general advice.

TECHNICAL SPECIFICATIONS

CARE AND MAINTENANCE INSTRUCTIONS

Take Care of Your Telephone

General advice on handling and protecting the telephone.

Avoid Water

Warnings and precautions regarding water exposure.

Electrical Storms

Safety advice during electrical storms.

Cleaning Your Telephone

Instructions for cleaning the telephone safely.

Related product manuals

Geemarc amplipower 60+

44 pages

Geemarc AMPLIDECT295SOS-PRO User Manual

Table of Contents

Questions and Answers:

Geemarc AMPLIDECT295SOS-PRO Specifications

Summary

IMPORTANT SAFETY INSTRUCTIONS

Disposal Warning

SET UP THE TELEPHONE

Package Contents

Location

Connect the Corded Base Station

Install and Charge the Handset Battery

Install the Pendant

GET TO KNOW YOUR PHONE

Overview of the Handset

Overview of the Corded Base

Overview of the Pendant

Handset LCD Display Icons and Symbols

Handset Menu Structure

Text and Digit Entry Table

English Character Set

USE YOUR PENDANT

SOS Emergency Calls

SOS Settings in Handset

Make SOS Emergency Calls

Select the SOS Language

Record SOS Messages

Play SOS Messages

Direct Memory Keys

USE YOUR PHONE

Make an External Call

Preparatory Dialing

Direct Dialing

Call from the Phonebook

Call from the Call List

Call from the Redial List

Call Timer

Answer a Call

Adjust Earpiece and Speakerphone Volume

Booster

End a Call

Mute a Call

Set the Handset Silent Mode

Set the Handset Keypad Lock

Redial the Last Number

Redial a Number from the Redial List

Store a Redial Number into the Phonebook

Delete a Redial Number

Delete the Entire Redial List

Find the Handset

Make an Internal Call

Intercom

Call All Handsets

Transfer an External Call

Make a 3-way Conference Call

PHONEBOOK

Add a New Phonebook Entry

Search for a Phonebook Entry

View a Phonebook Entry

Edit a Phonebook Entry

Delete a Phonebook Entry

Delete the Entire Private Phonebook

Check the Phonebook Usage

Set the Fast Dial Numbers

Add or Edit the Fast Dial Number

CALLER DISPLAY (NETWORK DEPENDENT)

View the Incoming Call List

Store a Call List Number into the Phonebook

Delete an Entry in the Call List

Delete the Entire Call List

PHONE SETTINGS

Clock Settings

Set the Date

Set the Time Format

Set the Time

Set the Date

Alarm Settings (Handset only)

Turn on/off the Alarm

Set the Alarm Time (if the Alarm is set to be ON)

Handset Settings