2.4 Install and Charge the Handset Battery
1. Plug the battery connector securely into the
socket inside the handset battery
compartment. Insert the supplied battery as
indicated.
2. Align the cover flat against the battery
compartment, and then slide it upwards
until it clicks into place.
3. Charge the handset by placing it face forward in the charger.
You hear a beep when the handset is charging in the charger.
NOTES
• At the first starting, the phone will ask you to select the language that you want
• Use only the supplied NiMH rechargeable battery pack.
• If you do not use the handset for a long time, disconnect and remove the battery
to prevent possible leakage.
To Next Page
Loading...
