5.1.5 Call from the Redial List
Using the handset:
1. Press to access the redial list.
2.
Press / to select the desired redial number.
3. Press or to dial the selected call list entry. Press
to turn on the
speakerphone if you have pressed in first .
5.1.6 Call Timer
Your handset or base automatically times the duration of each call. The call timer
will display a few seconds after the call has ended. It is shown in hours, minutes and
seconds format (HH:MM:SS).
5.2 Answer a Call
Using the handset:
If the handset is not on the base station:
When the phone rings, press or to answer a call. Press it again to turn on the
speakerphone.
If the handset is on the base station and if AUTO ANSWER is set to be ON: When the
phone rings, pick up the handset to answer a call.
5.3 Adjust Earpiece and Speakerphone Volume
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of earpiece and
speakerphone volume.
Using the handset:
During a call:
Press / to select from VOLUME 1 to VOLUME 5. The current setting is shown.
When you end the call, the setting will remain at the last selected level.
To Next Page
Loading...