8.2 Alarm Settings (Handset only)
You can use this phone to set an alarm clock. When an alarm is set, the displays
on the screen. When the alarm time is reached, the and “ALARM ON” flash on
the screen ringing with the alarm melody for a duration of 45 seconds. You can press
any key to disable the alarm. If snooze function is activated, the alarm will sound
again at the end of the snooze period of seven minutes.
NOTES:
a. Key press is still applicable if handset keypad is locked and when the alarm time
is reached.
b. The alarm volume level is the same as the settings of the handset ringer volume.
If the handset ringer is set to OFF, the alarm still sounds at VOLUME 1 level.
c. During an external call or an internal call, if an alarm is set and when the alarm
time is reached, the and “ALARM ON” will still flash. An alarm tone will be
emitted from the earpiece to notify user the alarm time is reached. Once user
press any key or press and hold to disable the alarm, it will revert to the call
duration screen.
d. During paging or ringing, the alarm will not sound when the alarm time is
reached. However, if snooze function is enabled, the alarm will sound again at
the end of the snooze period provided that it’s not ringing or in paging mode at
the end of the snooze period.
8.2.1 Turn on/off the Alarm
1. Press LEFT SOFTKEY and / to select ALARM.
2. Press LEFT SOFTKEY and / to select ON or OFF.
3. Press LEFT SOFTKEY to confirm.
NOTE:
If ON is selected, you are prompted to set the alarm time.
8.2.2 Set the Alarm Time (if the Alarm is set to be ON)
1. Follow Steps 1 to 3 in section 8.2.1.
2. Enter the alarm time.
3. Press LEFT SOFTKEY . You will be prompt to set the snooze function.
4. Press LEFT SOFTKEY and / to select ON or OFF.
5. Press LEFT SOFTKEY to confirm.
To Next Page
Loading...