9.5.4 Delete a Personalized OGM (SET OGM to DEFAULT)
Using the handset:
1. Repeat Steps 1 to 6 in the section of Playback the Outgoing Message (OGM).
2. Press RIGHT SOFTKEY to delete your personalized OGM and return to previous
menu and the pre-set OGM is restored automatically.
NOTE:
If pre-set OGM is playing, you are not allowed to delete the pre-set OGM.
9.5.5 Set the Answer Delay
You can set the number of rings before the answering machine answers and starts
playing your OGM. You can set the answering machine to answer after two to eight
rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first new
message has been registered - then the answering machine switches to answering
after approximately 2 signals. This is useful when using remote access; if you call up
the answering machine and there is no reply after four rings that means there are no
messages recorded and you can hang up before you are charged for the call.
Using the handset:
1. Press LEFT SOFTKEY and / to select ANS. MACHINE.
2. Press LEFT SOFTKEY and / to select TAM SETTINGS.
3. Press LEFT SOFTKEY and / to select ANSWER DELAY (Available
options: 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER).
4. Press LEFT SOFTKEY and / to select your desired answer delay.
5. Press LEFT SOFTKEY to confirm.
9.5.6 Set the Recording Time of Incoming Message
You can set the maximum length of the recording time of the incoming messages.
Using the handset:
1. Press LEFT SOFTKEY and / to select ANS. MACHINE.
2. Press LEFT SOFTKEY and / to select TAM SETTINGS.
3. Press LEFT SOFTKEY and / to select RECORD TIME.
4. Press LEFT SOFTKEY and / to select your desired recording time
(Available options: 60S, 120S, 180S, or UNLIMITED).
5. Press LEFT SOFTKEY to confirm.
To Next Page
Loading...