9.4 Record Memos on TAM
You can record your memo message for another user. When you record a memo, the
message counter will increase by one and the message can be played in the same way
as answering machine messages. Memo recording can still function even when the
answering machine is turned off.
Using the handset:
1. Press LEFT SOFTKEY and / to select ANS. MACHINE.
2. Press LEFT SOFTKEY and / to select MEMO.
3. Press LEFT SOFTKEY to start memo recording and “RECORDING” will be
displayed.
4. Press LEFT SOFTKEY to stop memo recording and save the memo.
OR
Press RIGHT SOFTKEY to stop memo recording without saving and go back
to TAM menu.
9.5 Answering Machine Settings (Base Only)
9.5.1 Set the Answer Mode
By default, the answer machine is set in ANS&REC mode which allows callers to leave
a message. This mode can be changed to ANSWER ONLY which does not allow
callers to leave a message. In that case, your callers will be prompted to call back
later.
You can select ANS & REC or ANSWER ONLY for the answering machine.
Using the handset:
1. Press LEFT SOFTKEY and / to select ANS. MACHINE.
2. Press LEFT SOFTKEY and / to select TAM SETTINGS.
3. Press LEFT SOFTKEY and / to select ANSWER MODE.
4. Press LEFT SOFTKEY and / to select ANS & REC or ANSWER ONLY.
5. Press LEFT SOFTKEY to confirm.
To Next Page
Loading...
