9 ANSWERING MACHINE
Your telephone base includes a telephone answering machine that records unanswered
calls when it is on. The answering machine can store up to 59 messages within the
maximum recording time of approximately 15 minutes. As well as recording incoming
messages, you can record memos for other users of your phone.
9.1 Switching Answering Machine On/Off
Using the handset:
1. Press LEFT SOFTKEY and / to select ANS. MACHINE.
2. Press LEFT SOFTKEY and / to select TAM ON/OFF.
3. Press LEFT SOFTKEY and / to select ON or OFF.
4. Press LEFT SOFTKEY to confirm.
Using the base direct key:
You can switch on / switch off the TAM function by pressing /ANS ON.
9.2 Play Messages on TAM
If you have new messages, the display will show e.g. 02/05 MSGS, which means you
have 2 new message out of total 5 messages. New messages are played first, and then
are saved as old messages, until they are deleted. Old messages are played again after
all new messages are played completely.
Using the handset:
1. Press LEFT SOFTKEY and / to select ANS. MACHINE.
2. Press LEFT SOFTKEY to show MSG PLAYBACK.
3. Press LEFT SOFTKEY again to start message playback and the screen
displays the date of the message received.
4. During message playback, press / to adjust the message playback volume
respectively.
NOTE:
After new message is played, the new message will be saved as an old message
automatically unless it is deleted.
5. Press LEFT SOFTKEY and / to select STOP, FORWARD, PREVIOUS or
DELETE to perform the following functions during message playback.
• STOP: Stop the current message playback and return to the ANS. MACHINE
menu.
• FORWARD: Skip to play the next message. The date information of the next
message will display if there is next message.
• PREVIOUS: Skip to repeat playing the current message from the beginning. The
date information of the current message will display.
• DELETE: Delete the current message and the next message will be played.
6. Press LEFT SOFTKEY to confirm the setting.
To Next Page
Loading...