5.11.2 Call All Handsets
Using the handset:
1. In idle mode, press LEFT SOFTKEY and the numbers of the registered
handsets or pendants will display except the calling handset.
2.
Press 9 to ring to all registered handsets and pendants.
5.11.3 Transfer an External Call
Using the handset:
During an external call:
1. Press LEFT SOFTKEY and select INTERCOM.
2. Press LEFT SOFTKEY to select the desired handset you want to
intercom with.
3. The external call is put on hold automatically and the called handset rings.
4. Press or on the called handset to establish an internal call.
5. Press on the calling handset or put the calling handset on the charging cradle
to end the current call with the external party.
6. The external call is transferred to the called handset.
5.11.4 Make a 3-way Conference Call
The conference call feature allows one external call to be shared with the corded
base and cordless handset or two cordless handsets. The three parties can share the
conversation and no network subscription is required.
Using the handset:
During the external call:
1. Follow Steps 1 to 4 in section 5.11.3.
2. Press and hold on the calling handset to establish the conference call.
NOTE:
Any party (corded base or cordless handset) hangs up during a conference call will
leave the other party still in connection with the external call.
To Next Page
Loading...