7
RMT-HD-DSP-IR REMOTE DESCRIPTIONS
1 Power On/Off
This will toggle the unit between the ON and STANDBY power states.
2 Enter Key (OK)
This button is used to complete commands.
3 Up, Down, Left Right Keys
These buttons are used to navigate the on-screen setup menu.
4 Stop Button
This button will immediately stop the playback of media.
5 Previous Media Button
If the loaded playlist contains multiple media fi les, this will begin playback of the
previous media item in the list.
6 Return Key
Some options in the setup menu will display a secondary pop-up window. This
button will remove this window and return the user to the previous screen.
7 Clear Key
When entering letter or numbers any mistakes can be cleared using this button.
8 Alphanumeric Buttons
These buttons are used to input letters and numbers for options in the setup
menu.
9 Mute Button
Use this button to toggle the mute function. Currently this feature is only
available for media that contains audio. Separate background audio is not
affected.
10 TV Out Button
This button will toggle between the HDMI and VGA output modes.
11 Next Media Button
If the loaded playlist contains multiple media fi les, this will begin playback of the
next media item in the list.
12 Play Pause Button
This button will pause/resume the playback of media.
13 Volume Down Button
This button can be used to lower the volume of media during playback. If the
media being played does not have audio this function will not be available.
14 Volume Up Button
This button can be used to raise the volume of media during playback. If the
media being played does not have audio this function will not be available.
15 Set-Up Button
When playing content this will display the on-screen picture controls. When
media is not being played, this will initialize the on-screen setup menu.
To Next Page
Loading...
