114
Remote Controls Menu
Remote Controls > Play / Pause / Stop
Controls for playing, pausing or stopping the content from being displayed.
Press the Play button to continue playing content that was paused using the
Pause button.
Press the Pause button to pause the content.
Press the Stop button to halt the presentation. The Play button will need to be
pressed to start the presentation from the beginning.
Remote Controls > Display On / Display Off
Display Off will mask (hide) the content being presented. Display On will unmask
(show) the content being presented. These two buttons permit hiding a presenta-
tion without having to stop it.
Remote Controls > Reboot
The Reboot button allows the DSP to be restarted without having to power-cycle
the unit. This process is usually referred to as a “warm boot.” Three audible
beeps are heard from the unit each time the DSP is rebooted.
DSP SERVER SOFTWARE
To Next Page
Loading...
