8
How to Connect the Hi Def Digital Signage Player
1. Each unit can be placed in close proximity of the display. The integrated wall
mounting brackets are provided for installation on a wall or in a cabinet.
2. Connect an HDMI compliant display to the HDMI output located on the rear
panel of the unit using the provided HDMI cable.
3. Optionally, connect a VGA compliant display to the VGA port located on the
rear panel of the unit using a user supplied cable.
4. If audio needs to be routed to an external amplifi er or audio device, the
3.5mm mini-jack stereo port can be used. Connect an appropriate audio
cable between this port and the audio device.
5. Connect this unit to a local TCP/IP network (necessary for usage of the
remote management features) using a standard network cable. This unit is
capable of 10/100 Mbps transfer speeds.
6. Connect the included 12V DC power supply to power input on the rear panel
of the unit. Connect the plug end into an open wall socket.
Operating the Hi Def Digital Signage Player
This unit can operate as a standalone unit with manual updates via the integrated
USB port. To realize the full potential of the EXT-HD-DSP, it is recommended
that the unit be connected to the same network as the Server PC (DSP manage-
ment software installed). Once connected, remote management, monitoring, and
schedule/content-updates will be possible over the network from the server PC.
To begin using the DSP please follow the steps below:
1. Install software
2. Confi gure DSP hardware
3. Create schedule
4. Upload the schedule to the DSP
CONNECTING AND OPERATING THE
HI DEF DIGITAL SIGNAGE PLAYER
To Next Page
Loading...