120
Gefen DSP Server Options > Directory
The Directory section holds the path to current working directories.
Data Directory
The current working directory of the DSP Server software. By default, this path
usually appears as: C:\Program Files\Gefen\DSP
It is not recommended that the Data Directory path be changed while
the DSP Server software is running. Doing so may cause undesirable
results or possibly a DSP Server crash, interrupting the playback of the
current digital signage media.
Firmware File
The current path to the location of the fi rmware fi le. If the DSP Server software is
to be updated, the fi rmware fi le should be located in this directory.
Gefen DSP Server Options > Time Sync
Displays time information allows resetting to Standard Time.
Refresh
Refreshes the current Local System TIme and Standard Time for TimeZone.
Reset to Standard Time
Resets System Time to Standard Time for TimeZone.
DSP SERVER SOFTWARE
To Next Page
Loading...
