131
DeviceView > Network > Gateway
The IP gateway used by the DSP Server. If Edit Mode > Network Section is
enabled, the IP gateway address can be changed.
DeviceView > Network > DNS1
The fi rst DNS used to resolve the domain name. If Edit Mode > Network Section
is enabled, the address for the fi rst DNS server can be changed.
DeviceView > Network > DNS2
The DNS used to resolve the domain name if it cannot be found using DNS1. If
Edit Mode > Network Section is enabled, the address for the second DNS server
can be changed.
DeviceView > Server
The information contained under this section can be edited when the
Edit Mode > Server box is checked.
DeviceView > Server > Server Type
The server type. This information will always indicate DSP Server. DSP Server
is the only available option when Edit Mode > Server Section is enabled.
DeviceView > Server > HeartBeat
The HeartBeat is a message which is sent to the DSP Server and the DSP unit at
regular intervals (usually seconds). The HeartBeat is used to negotiate the avail-
ability of the DSP unit on the network.
DeviceView > Server > Host
Specifi es the host.
DeviceView > Server > IP
The address of the computer running the DSP Server software. If Edit Mode >
Server Section is enabled, the IP address can be changed.
DeviceView > Server > Port
The port used by the DSP Server software to access the DSP. If Edit Mode >
Server Section is enabled, the port can be changed.
DSP SERVER SOFTWARE
To Next Page
Loading...
