gefran ADV200 User Manual

196 ADV200 • Functions description and parameters list
31 Mot phase loss
32 Condensation
33 Plc1 fault
34 Plc2 fault
35 Plc3 fault
36 Plc4 fault
37 Plc5 fault
38 Plc6 fault
39 Plc7 fault
40 Plc8 fault
41 Watchdog
42 Trap error
43 System error
44 User error
45 Param error
46 Load def par
47 Plc cfg error
48 Load def plc
49 Key failed
50 Encoder error
51 Opt cfg change
52 HumTempSensErr
53 Plc9 fault
54 Plc10 fault
55 Plc11 fault
56 Plc12 fault
57 Plc13 fault
58 Plc14 fault
59 Plc15 fault
60 Plc16 fault
61 UV Wng&Restart
62 An inpLoss
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
4780 Alarm PLC UINT16 0 0 0 ER
This parameter displays the state of the alarms generated by the application written with the internal MDPlc.
Bit Description
0 1 = PLC 1 fault active
1 1 = PLC 2 fault active
2 1 = PLC 3 fault active
3 1 = PLC 4 fault active
4 1 = PLC 5 fault active
5 1 = PLC 6 fault active
6 1 = PLC 7 fault active
7 1 = PLC 8 fault active
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
4840 Alarm lo state UINT32 32 0 0 0 ER
This parameter displays the state of alarms 1..32 of the drive.
Bit Description
0 1 = Overvoltage active
1 1 = Undervoltage active
2 1 = Ground fault active
3 1 = Overcurrent active
4 1 = Desaturation active
5 1 – MultiUndervolt active

gefran ADV200 Specifications

General

Brand	gefran
Model	ADV200
Category	Inverter
Language	English