AFE200 • Instruction Manual 101
Menu PAR Description UM Type FB BIT Def Min Max Acc
10.18 1866 Analog out 1X mon cnt INT16 0 0 0 ER
The actual value of the voltage present on analog output 1 of the expansion card is
displayed.
Menu PAR Description UM Type FB BIT Def Min Max Acc
10.19 1868 Analog out 2X mon cnt INT16 0 0 0 ER
The actual value of the voltage or current present on analog output 2 of the expansion
card is displayed.
Menu PAR Description UM Type FB BIT Def Min Max Acc
10.20 1874 An out 1X sign src LINK 16 6000 0 16384 ERW
10.21 1876 An out 2X sign src LINK 16 6000 0 16384 ERW
L�DIGSEL2
Selection of the origin (source) for the signal that determines the polarity of the relative
analog output of the expansion card. The terminal to be associated with this function
can be selected from the “L_DIGSEL2” selection list.
Menu PAR Description UM Type FB BIT Def Min Max Acc
10.22 1882 Analog out 1X min cnt INT16 -16384 -32768 +32767 ERW
10.23 1884 Analog out 1X max cnt INT16 16384 -32768 +32767 ERW
Setting of the minimum and maximum values for the analog output for the voltage
present on analog output 1 of the expansion card.
Menu PAR Description UM Type FB BIT Def Min Max Acc
10.24 1890 Analog out 2X min cnt INT16 -16384 -32768 +32767 ERW
10.25 1892 Analog out 2X max cnt INT16 16384 -32768 +32767 ERW
Setting of the minimum and maximum values for the analog output in current or volt-
age present on analog output 2 of the expansion card.
Menu PAR Description UM Type FB BIT Def Min Max Acc
10.26 1898 Analog out 2X type ENUM -10V..+10V 0 2 ERW
Selection of the programmed signal on analog output 2 of the expansion card. De-
pending on the output signal, move the switch on the regulation card. The standard
output is coded for the signal in voltage.
0 0..20mA
1 4..20mA
2 -10V..+10V
Select option 0 in order to apply a maximum voltage of ±12.5V (typically ±10V/5mA) to
analog output 2.
Select option 1 in order to apply a maximum voltage of +10V or a signal in current of 0
... 20 mA to analog output 2. The signal must be positive.
Select option 2 to apply a signal in current of 4...20 mA to analog output 2.
To Next Page
Loading...