2 AFE200 • Instruction Manual
Information about this manual
Software version
This manual is updated according the software version V 1.0XX.
Variation of the number replacing “X” have no inuence on the functionality of thedevice.
The identication number of the software version is indicated on the identication plate of the
drive or can be checked with the Firmware ver.rel - PAR 490 parameter, menu 2.5
General information
Nota ! In industry, the terms “Inverter”, “Regulator” and “Drive” are sometimes interchanged. In this document, the
term “Drive” will be used.
Before using the product, read the safety instruction section carefully. Keep the manual in a
safe place and available to engineering and installation personnel during the product function-
ing period.
Gefran S.p.A has the right to modify products, data and dimensions without notice. The data
can only be used for the product description and they can not be understood as legally stated
properties.
Thank you for choosing this Gefran product.
We will be glad to receive any possible information which could help us improvingthis manual.
The e-mail address is the following: techdoc@gefran.com.
All rights reserved
To Next Page
Loading...