gefran AFE200 Series

12 AFE200 • Instruction Manual
2.1 Drive type designation
The main technical characteristic of the drive are showed in the product code and
in the nameplate.
AFE200 3 220-K X X -4 -XX YY
Parallel version only:
XX : MS = MASTER
SL = SLAVE
YY : 04 = 400.0 kW
05 = 500.0 kW
06 = 630.0 kW
07 = 710.0 kW
09 = 900.0 kW
10 = 1000.0 kW
Rated voltage :
4 = 400 Vac, 50 Hz
4A = 460 Vac, 60 Hz
6 = 500...690 Vac
6A = 690 Vac / 60Hz
Software: X = standard
Braking unit:
X = non included
B = included
Keypad:
X = non included
K = included
Drive power, in kW:
200 = 22.0 kW
450 = 45.0 kW
900 = 90.0 kW
1100 = 110.0 kW
1320 = 132.0 kW
1600 = 160.0 kW
2000 = 200.0 kW
2500 = 250.0 kW
3150 = 315.0 kW
3550 = 355.0 kW
Mechanical drive sizes:
3 = size 3
4 = size 4
5 = size 5
6 = size 6
7 = size 7
Active Front End Regenerative Power Supply Unit
Identication Nameplate
Type : AFE200-3220 -KXX-4 S/N: 09012345
Inp: 400Vac -15% ÷ 500 Vac +5% 50/60 Hz 3ph
40A@400Vac 36A@480Vac
Out : 650Vdc-780Vdc
28kW 43A @650Vdc 39A @780Vdc Ovld.150% -60s
42kW 64A @650Vdc 57A @780Vdc Ovld.110% -60s
Drive model
Serial number
Input (mains supply)
Output (Output voltage, power,
current, CT and VT overloads)
Approvals
Firmware & cards revision level nameplate
Firmware HW release S/N 09012345 Prod.
Release
D F P R S BU SW . CFG
CONF
0.8.0 A -.G -.I 10.10.10 A1
Power
Regulation
Safety
Braking unit
Software
revision
Product
configuration
Cards revision
Firmware revision