AFE200 • Instruction Manual 77
Menu PAR Description UM Type FB BIT Def Min Max Acc
4.14 574 Startup display INT16 -1 -1 20000 ERW
It is possible to set the parameter that will automatically be displayed when the drive is
switched on. If set to -1 the drive moves to the display menu.
Menu PAR Description UM Type FB BIT Def Min Max Acc
4.15 576 Display backlight BIT 0 0 1 ERW
Enabling of the backlight on the drive display.
If set to 0 the display backlight will go off when the drive has been on for three min-
utes.
If set to 1 the backlight will stay on for as long as the drive is powered.
Menu PAR Description UM Type FB BIT Def Min Max Acc
4.16 578 Language select ENUM English 0 9 RWZ
Setting of the drive programming language.
0 English
1 Italiano
2 Francais
3 Deutsch
4 Espanol
5 Polish
6 Romanian
7 Russian
8 Turkish
9 Portuguese
Note! The Load Default command (par. 580) does not modify this parameter.
Menu PAR Description UM Type FB BIT Def Min Max Acc
4.17 580 Load default BIT 0 0 1 RWZ
Transfers the standard factory settings to the drive memory (“Def” column in the
parameters table).
Menu PAR Description UM Type FB BIT Def Min Max Acc
4.18 590 Save par to keypad BIT 0 0 1 RW
Transfers the parameters currently stored in the drive and saves them in the keypad
memory.
Menu PAR Description UM Type FB BIT Def Min Max Acc
4.19 592 Load par from keypad BIT 0 0 1 RWZ
Transfers the parameters from the keypad memory to the drive.
Menu PAR Description UM Type FB BIT Def Min Max Acc
4.20 594 Keypad memory select UINT16 1 1 5 ERW
Selection of the area of the keypad memory to which to transfer and save the param-
eters stored in the drive.
To Next Page
Loading...