gefran VDL200 Series User Manual

40 VDL200 • Quick installation guide - Specifications and connection
8.2.
8.2.8.1 Language selection
Menu 04 DRIVE CONFIG, parameter 04.19 Language select, PAR: 578,
default=English. This is used to set one of the languages available: English, Italian, French, German, Spanish and
Turkish.
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
05 LIFT

x6
04 DRIVE CONFIG
12/19 PAR: 578
Language sel
e
ct
English
Value: 0
E
04 DRIVE CONFIG
12/19 PAR: 578
Language sel
e
ct
English
Value: 0

04 DRIVE CONFIG
12/19 PAR: 578
Language sel
e
ct
Italian
Value: 1
Press EESC to cancel.
8.2.8.2 Selection of Easy/Expert mode
Menu 04 DRIVE CONFIG, parameter 04.03 Access mode, PAR: 554.

Easy (default) only the main parameters are displayed
Expert for advanced users, all the parameters are displayed
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
05 LIFT
 
x2
04 DRIVE CONFIG
03/19 PAR: 554
Access mode
Easy
Value: 0
E

04 DRIVE CONFIG
03/19 PAR: 554
Access mode
Expert
Value: 1
8.2.9 Startup display
Menu 04 DRIVE CONFIG, parameter 04.9 Startup display, PAR: 574.
This is used to set the parameter that will be displayed automatically at drive power-on.
Entering the value -1 (default), the function is disabled and the main menu is displayed at power-on.
8.2.
Menu 04 DRIVE CONFIG, parameter 04.10 Display backlight, PAR: 576. Sets lighting of the display:
On the light of the display always stays on.
󰀨 󰀨
8.2.11 Alarms
The alarms page is displayed automatically when an alarm occurs.
j
Alarm RTN : 1/2
k
Undervoltage
l
Code:
0000H0
m
Time: 27:45
(1) Alarm
RTN: indicates that the alarm has been reset; if the alarm is still active, nothing is displayed.
x/y: x indicates the position of this alarm in the list of alarms and y the number of alarms (the alarm with lowest x is
the most recent)
(2) Description of the alarm
(3) Sub-code of the alarm, provides other information in addition to the description
(4) Moment the alarm occurred in machine time.

Note! For further information, see chapter 10.1.
8.2.11.1 Alarm reset
• If the alarm page is displayed:
Pressing the RST key, the alarms are reset and all alarms that have been reset are eliminated from the list. If, after

the alarms page.
• If the alarm page is not displayed:
Press the RST key to reset the alarms. If active alarms are still present following reset, the alarm page is opened.

gefran VDL200 Series Specifications

General

Brand	gefran
Model	VDL200 Series
Category	DC Drives
Language	English