EasyManua.ls Logo

gefran ADV200 WA DC Series - User Manual

gefran ADV200 WA DC Series
142 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
...... Quick start up guide
Specification and installation
SIEIDrive
Field oriented vector AC Drive
for syncronous/asyncronous motors
ADV200 WA
ADV200 WA-...-DC

Table of Contents

Questions and Answers

  • D
    Dawn HartAug 5, 2025
    Why am I getting a DC link overvoltage alarm on my gefran ADV200 WA DC?
    • J
      Jane JacksonAug 6, 2025
      A DC link overvoltage alarm may occur because the voltage arriving at the drive power section is related to the PAR 560 Mains voltage. To resolve this, you can try the following: * Extend the deceleration ramp. * Use a braking resistor between terminals. * Use the VDC Control function.

gefran ADV200 WA DC Series Specifications

General IconGeneral
Control ModeArmature voltage
Field RegulatorIntegrated
CommunicationModbus RTU
ProtectionOvercurrent, overtemperature, overvoltage, undervoltage, field loss
Operating Temperature0°C to +40°C
Humidity< 95% non-condensing

Related product manuals