PRINTED IN U.S.A. 5 913225/CP0807
SERIAL PLATE OF THE TELESCOPIC
HANDLER (FIG. A)
- Model
- P.I.N.
- Net Mass
- Capacity
- Year of Manufacture
For further technical information regarding the tele-
scopic handler, refer to chapter: 3 - SPECIFICA-
TIONS: SPECIFICATIONS.
ENGINE (FIG. B)
- Engine No.
HYDROSTATIC PUMP (FIG. C)
- Reference No.
- Type of Codification
- Serial No.
- Manufacturer’s No.
- Year of Manuafacture
HYDROSTATIC MOTOR (FIG. D)
- Reference No.
- Type of Codification
- Serial No.
- Manufacturer’s No.
- Year of Manuafacture
C
D
B
IDENTIFICATION OF THE TELESCOPIC
HANDLER
Because of our policy to promote a continual improve-
ment of our products, our lines of telescopic handlers
may undergo certain modifications, without obligation
to update units previously delivered.
When ordering parts or when requesting technical
information, always specify applicable model and ser-
ial numbers.
NOTE: For the owner's convenience, it is recom-
mended these numbers be recorded in the
spaces provided at the time of delivery of the tele-
scopic handler.
Chapter 1
SPECIFICATIONS
Courtesy of CraneMarket.com
To Next Page
Loading...
Need help?
General
