Printed in U.S.A. 37 913364/BP0314
RT250 - CAB
REAR CAB - HVAC COVER
Item
No. Part No. Description Qty.
Item
No. Part No. Description Qty.
01 WELDMENT, REAR BILL * 1
50303655 Refer to the illustration below
50301820 Refer to the illustration below
02 195660 FILTER, FRESH AIR 1
03 275598 COVER, FRESH AIR FILTER 1
04 654004 FW 5/16” AWZY 2
05 650484 CS 5/16” x 1/2” C5ZY 2
06 271627 SEAL, FOAM SIDE 2
07 275601 PAD, HOUSING TOP 1
08 275599 PAD, HOUSING LH 1
09 275600 PAD, HOUSING RH 1
10 187030 DRIP CAP ** 2
11 244815 HOSE, MENDER 1/2" HOSE ** 2
12 50303658 HOSE/HVAC DRAIN 0.5 X 30 IN. ** 1
13 50303658 HOSE/HVAC DRAIN 0.5 X 30 IN. ** 1
14 50303692 GROMMET, .75ID .125GW 1.0GD ** 2
15 245235 CLAMP/HOSE WIRE .75 OD ** 2
16 650488 CS 3/8" x 3/4" C5ZY 4
17 65049 FW 3/8" ANZY 4
18 274788 SEAL, FOAM 1
19 50301824 SEAL, FOAM TOP 1
20 135270 WASHER, SEALING 3/8" 5
21 650490 CS 3/8" x 1" C5ZY 5
*
50303655
50301820
(2) Drain Tubes
(3) Drain Holes
(drilled in bottom of weldment)
IMPORTANT: When ordering a replacement rear bill
weldment be sure to determine which one to order.
Earlier units use weldment PN 50301820, which has
three drain holes drilled into the bottom plate . Later
units use weldment PN 50303655, which has two
drain tubes that use items 10-14, and item 18.
** Not used with earlier rear bill weldment 50301820.
To Next Page
Loading...
