Gehl RT250 User Manual

Printed in U.S.A. 41 913364/BP0314
RT250 - CHASSIS
COUNTER WEIGHTS
01 271601 CS 5/8 x 4 C8ORG SP 6
02 651150 FW 5/8" ANZY 6
03 50300813 PLATE (optional weight) * 8
04 50300815 COUNTER WEIGHT (cast) 1
05 651808 CB SN 3/4" x 5-1/2" C5ZY 2
Item
No. Part No. Description Qty.
06 651763 CB 3/4" x 5" C5ZY 1
07 079209 HLN INST 3/4" CZY 3
08 651564 FW 3/4" HT ZY 3
09 50300687 SHIM (0.0747" ) 4
10 50300686 SHIM (0.1046") 2
* IMPORTANT: If installing optional plates, be sure
to install four plates on each side—do not install more
than four plates or less than four plates. Failure to
follow this recommendation may result in structural
failure to the chassis, or damage to the hydraulic tank
and other components.
Item
No. Part No. Description Qty.

Gehl RT250 Specifications

General

Rated Operating Capacity	2, 500 lbs
Engine Power	74 hp
Tipping Load	5, 000 lbs
Auxiliary Hydraulics - High Flow	35 gpm
Engine Net Power	74 hp
Engine Gross Power	74 hp
Overall Length with Bucket	146.2 inches
Width	72 inches
Horsepower	74 hp
Length with Bucket	146.2 inches