Gehl RT250 - Page 77

Printed in U.S.A. 75 913364/BP0314
RT250 - ENGINE / HYDRAULICS
RADIATOR / HYDRAULIC COOLER
(Early Style - SN 70129 and before)
01 50300969 COOLER (radiator / hydraulic cooler) 1
(includes item 2)
02 50280174 RADIATOR CAP, 13 LBS. 1
03 076588 CS FL LOCK 3/8" x 3/4" C5ZY AR
04 L41859 CLAMP, HOSE 0.56" x 0.41" 1
05 210-19533 HN FL CLOC 3/8" CZY AR
06 133074 ST HB05-MP04 (brass) 1
07 062023 CLAMP, HOSE #5 2
08 50301451 HOSE 5/16" x 27" 1
09 50302457 SENSOR, COOLANT LEVEL 1
10 055030 CLAMP, HOSE #28 4
11 L75990 CLAMP, HOSE #16 2
12 095619 CLAMP, HOSE 1.25 x 0.41 1
13 50301453 HOSE, COOLANT 7/8" x 22" 1
14 50300947 HOSE, UPPER RADIATOR 1
15 L570017 CLAMP, HOSE 1.19" x 0.41" 1
16 50302523 FAN SHROUD 1
17 50300970 FAN GUARD 1
18 055005 90 MJ12-MAORB12 * 1
19 310-32616 CS FL LOCK 3/8" x 1/2" C2ZY 6
20 135025 HOSE, MP 12 x 36.0" 1
21 121684 90 MJ-MAORB16 1
22 50301444 HOSE, MP 12 x 68" 1
23 131449 T BR MJ120MJ12-MAORB12 1
24 50302521 HOSE, LOWER RADIATOR 1
25 137599 HOSE, MP 12 x 26.0 IN. * 1
26 081380 CS FL LOCK 5/16" x 3/4" C5ZY 6
27 270238 MOUNT, RADIATOR 2
28 071701 LN 5/16" CBZY 4
29 650810 FW 5/16" ANZY 6
30 650545 CS 5/16" x 1-1/4" C5ZY 2
31 210-31017 HN LF CLOC 5/16" CZY 6
32 071703 LN 3/8" CBZY 2
33 270301 WASHER, REBOUND 2
34 270298 ISOLATOR, RUBBER 2
35 654006 FW 3/8" AWZY 2
36 650535 CS 3.8" x 2-1/4" C5ZY 2
37 140883 90-LL MJ12-MAORB12 1
38 50302766 TUBE, HYDRAULIC * 1
39 136226 CLAMP, HOSE 0.75" x 0.41" * 2
40 310-32616 CS FL LOCK 3/8" x 1/2" C2ZY * 2
41 074280 90 MJ16-MAORB12 ** 1
42 50302969 HOSE, MP 16 x 56 " ** 1
43 090666 HN FL SLOC 3/8 CZY ** 1
44 50302971 BRACKET, CLAMP MOUNT ** 1
45 075196 CLAMP, HOSE 1.50 x 0.41" ** 1
46 081377 CS FL LOCK 3/8" x 1-1/4" C5ZY ** 2
47 088117 90 MJ16-FJS16 ** 1
48 054818 ST MJ16-MORB12 ** 1
* Used only with standard auxiliary hydraulics
** Used only with the High-Flow hydraulics option
Item
No. Part No. Description Qty.
Item
No. Part No. Description Qty.
41
42
43
44
45
46
46
47
48
High-Flow
Hydraulics
(Option)
NOTE: Use items 40-48 for machines equipped
with the High-Flow hydraulics option in lieu of
Items 18, 25, 38-40, which are used only for the
standard auxiliary hydraulics system.
Refer to
page 102 for
hydraulic
connections.
Connects to
hydraulic tank
return
Connects to
hydraulic
cooler
IMPORTANT: Later machines used different hoses
and fittings. The late-style radiator/cooler is shown on
the previous page. Be sure to verify the correct parts
before ordering.