Gehl RT250 User Manual

Printed in U.S.A. 83 913364/BP0314
RT250 - TRACKS
TRACK DRIVE MOTOR COMPONENTS
01 274423 MOTOR, DRIVE 1273cc W/FLANGE 1
(includes all items shown)
02 50280126 COVER ASSEMBLY 1
03 50286441 REDUCTION ASSEMBLY 1
04 50280128 KIT, SEAL NUT 1
05 50280129 BASE PLATE ASSEMBLY 1
06 50280130 SPOOL KIT, TWO SPEED 1
07 50280131 KIT, FLUSHING 1
08 50280132 CYLINDER BLOCK ASSEMBLY 1
09 50280134 SWASH PLATE KIT (1098 cc) 1
10 50280135 MOTOR SHAFT ASSEMBLY 1
11 50280136 KIT, BEARINGS 1
12 50280137 KIT, PARK BRAKE 1
13 50280138 KIT, REPAIR 1
14 50280139 QUAD RING 1
15 50280151 PLUG 2
16 NSS PIN (included with #5, 12 and 13) AR
17 50280125 SHCS M12X1.75-12.9 L.35 7
Item
No. Part No. Description Qty.
Item
No. Part No. Description Qty.
NOTE: Quantities shown are for one track drive
motor assembly. When ordering parts, be
aware that the machine uses two track drive
motor assemblies, one on each side.

Gehl RT250 Specifications

General

Rated Operating Capacity	2, 500 lbs
Engine Power	74 hp
Tipping Load	5, 000 lbs
Auxiliary Hydraulics - High Flow	35 gpm
Engine Net Power	74 hp
Engine Gross Power	74 hp
Overall Length with Bucket	146.2 inches
Width	72 inches
Horsepower	74 hp
Length with Bucket	146.2 inches