Gehl RT250 - Page 9

Printed in U.S.A. 7 913364/BP0314
RT250 - CAB
STANDARD CAB
Item
No. Part No. Description Qty.
Item
No. Part No. Description Qty.
01 50302312 ROPS WELDMENT 1
02 057557 FW 17/32 ZY 2
03 650495 CS 1/2” x 1-1/4” C5ZY 2
04 COVER, POST (Left) (see below) 1
50300218 (Standard - no door)
50300210 (Swing-Out Door - w/ heater)-(Option)*
50300215 (Swing-Out Door - no heater)-(Option) *
05 COVER, POST (Right) (see below) 1
50300219 (Standard - no door)
50300212 (Swing-Out Door - w/ heater)-(Option)*
50300216 (Swing-Out Door - no heater)-(Option) *
06 651783 SCREW, TPH TF CR #8-32x3/4 CZY 8
07 242633 GROMMET, 0.375”x0.188GW 1.0 2
08 270848 WINDOW, TOP 1
09 650835 CS 1/4” x 1” C5ZY 6
137462 WASHER, 1/4” SEALING 6
10 271627 SEAL, FOAM SIDE 2
11 135270 WASHER, SEALING 3/8” 5
12 650488 CS 3/8” x 3/4” C5ZY 4
13 50301826 WELDMENT, REAR BILL ** 1
14 654004 FW 5/16” AWZY 2
23 654049 FW 3/8 ANZY 4
24 651783 SCREW/TPHTF CR *8-32x3/4 7
650606 FW #8 AZ (not shown) 7
25 50300057 COVER, DOOR HEADER 1
26 192182 PLUG, RUBBER 2
27 650568 CS 5/16" x 2" C5ZY 2
28 50301141 SPACER 2
29 50301434 SPACER AR
30 275016 ISOLATOR, 1" x 1-1/2" RUBBER 2
31 50301581 SEAL, BULB 0.63" x 37.5" 1
32 50301580 SEAL, BULB 0.63" x 56.25" 2
34 50301118 GROMMET, CAB ELECTRICAL 1
35 50301824 SEAL, FOAM 1
36 650490 CS 3/8" x 1" C5ZY 5
37 210-31017 LN FL CTR 5/16 CFZY 1
38 50302309 BUSHING, BRONZE 1
39 50302473 WASHER, BEVELED 1
40 030-31941 SCREW, SHOULDERED 3/8 "x5/8" 1
41 50302182 CAB RESTRAINT, WELDMENT 1
42 650818 CS 3/8" x 3" C5ZY 1
43 50301852 SPRING, TORSION 1
44 50302181 SPACER 1
45 067847 HLN INST 3/8" CZY 1
* When machine is equipped with optional swing-out door.
** Refer to page 36 for additional rear bill weldments.
Units equipped with heaters or air conditioning (HVAC) use
a different rear bill weldment.