Geller TL-550 - Setting DISCOUNT (-)

b) The GST and PST are added to an item separately, based only on the original price of
the item. For example, if a 10% PST and a 7% GST are added to a Department 1 item
(originally $10.00), 10% ($1.00) and 7% ($0.70) are each added separately to the $10.00,
making a total of $11.70.
To select the taxation system used in Canada, and to choose method a) or b), set System
Flag 15, in “Setting System Flags.” If you select the Canadian taxation system, TAX1 will
be used for GST, and TAX2, TAX3 and TAX4 are used for PST, automatically. You can also
set the GST (TAX1) so that it is included in the PST, by setting System Flag 15.
4.6 Setting DISCOUNT ( - )
The
[-]
Key is used to discount a certain amount. You can enter the discount amount and
change the function flags settings for this key. You can use this key with a preset discount
amount or by entering a discount amount on the keyboard. The [-2] (minus2) key has the
same setting function.

Setting Discount Amount
Enter a discount amount up to seven-digit long.

Setting Function Flags
Enter a number and
ENTER
, and move to next bit# by
.
Bit# Options: Function:
N1
0 to 6 Set a limit on the number of digits that can be entered with the
[-]
Key.
If you enter 1 to 6, the limit is set for one to six digits. If you enter 0,
seven digits can be entered.
N2
0 After discount, levy a tax.
1 Before discount, levy a tax.
N3
0 Do not add TAX4 to the discount amount calculated with this key.
1 Add TAX4 to the discount amount calculated with this key.
N4
0 Add no TAX to the discount amount calculated with this key.
1 Add TAX1 to the discount amount calculated with this key.
2 Add TAX2 to the discount amount calculated with this key.
3 Add TAX1 and TAX2 to the discount amount calculated with this key.
4 Add TAX3 to the discount amount calculated with this key.
5 Add TAX1 and TAX3 to the discount amount calculated with this key.
6 Add TAX2 and TAX3 to the discount amount calculated with this key.
7 Add TAX1, TAX2 and TAX3 to the discount amount calculated with
this key.
To move to DISCOUNT 2, just press
PAGE UP
. To return to PROGRAM 1 MENU, press
ESC
.
4. P1 programming
22
1
2
3
4
5
6
7
8
9
10
11
12